Essence We.R Guía de usuario descargar pdf (Pagina 123)

Installation of the WeR@Home™ System

System User Guide

123

demonstrated in Figure 93 above.

2. Use a flat screwdriver to remove the punch-outs (see Figure 93 above).

3. Place and hold the base on the desired mounting location and mark the drilling locations (the above-

mentioned punch-outs).

4. Drill the holes; insert three (3) dowels if needed, place the base over them and screw in the three (3)

screws.

3.9.2.3 Installing with Pre-attached Double-side Tape

1. Release the Indoor Siren mounting base (above Figure 92).

2. Peel the tapes’ protective covers.

3. Attach the mounting base to its designated location while applying slight pressure.

4. Slide the Indoor Siren into the mounting base.

3.9.2.4 Dismounting the Indoor Siren

For dismounting Siren from its designated installation site (i.e. in case of battery replacement):

1. Press over the tab

2. Slide the Indoor Siren body upwards as demonstrated in Figure 120 below.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 290 291

Sin comentarios

Essence We.R Guía de usuario Pagina 123